Description
Upgrade your FLEX with KORHEX to support the latest MDG1, ETC3 and more protected CPUs without having to desolder resistances in BOOT GLITCH mode!
KOREHX is available at this price including software activation ONLY for owners of full FLEX kits bought from us. You need to provide your serial number upon purchase.
If you did not buy FLEX from us, contact us for a quote.
To use the related protocols, we recommend subscription to be active as well.
To learn how to use it, check out our video:
For a supported ECUs list, although not 100% accurate, you can click here and select BOOT GLITCH from the filters.
However, this will also include ECUs done via regular boot glitch without KORHEX (some ECUs have both options). If you want to be sure, check your FLEX software with FLEX connected instead - if in the manual there is only the mask of KORHEX, then only KORHEX can be used. If there is the KORHEX interface as shown here, but the manual also shows you can directly remove resistor and connect to E1, it means either option will work.
Note: Mask F and G (5 euro each) are not in stock and should be bought separately, or printed via 3D printer. STL files are available on FLEX software.
2 Antennas are provided, they are the same, one is spare.
For the activation, just insert the SN of the Korhex (you find it written on the back) on the MMS Center system, and it will activate immediately for use.
| Item |
Description |
Quantity |
| KRX02.001 |
Korhex main device |
1 |
| KRX02.002 |
External Korhex |
1 |
| KRX03.001 |
Korhex USB cable |
1 |
| FLX4.9.1 |
3P Power Cord 1.20 m for FLX4.9 |
1 |
| FLX4.9A |
European plug - Type E/F |
1 |
| FLX4.9B |
UK plug - Type G |
1 |
| FLX4.9C |
American plug - Type B |
1 |
| KRX02.003 |
Korhex power supply |
1 |
| KRX02.004A |
Korhex Antenna A |
2 |
| KRX04.001 |
Korhex Mask |
4 (A+B+D+E) |
| KRX08.001 |
Korhex carrying case |
1 |
Shipping
