MAGICMOTORSPORT DynoRoad Wheel-based Dynamometer for performance analysis

Attention! This is the last production batch existent, which means there may be NO replacements available even through the manufacturer!

To learn about the functionment of the DynoRoad, we recommend the professional video made by Darkside Developments on Youtube.

App available on Play Store and App Store

Do you want to purchase a Dyno but was worried about space, noise or the huge costs involved?
Do you want to make a budget investment to bring your tuning business to the next level without a commitment with 6 zeroes?
You may want to try DynoRoad, MAGICMOTORSPORT's wheel-based dynamometer.

Main features:
- power, torque, acceleration measurement
- integrated sensors measurement
- high precision
- free app on smartphone
- built-in rechargeable battery

How to use it?
Getting started with DynoRoad is as easy as mounting the car dyno on the vehicle’s wheel, pressing the ON / OFF switch and connecting it to your mobile device.

Fasten your seat belts and start your engine: after activating your car dyno with a Magicmotorsport account, you’ll need to enter your car details to perform accurate measurements. 

You can quickly and easily calibrate DynoRoad by maintaining 3000RPM for 5 seconds, while moving your vehicle at least 30 km/h in 4th gear. Additionally, you can change these settings to accommodate different vehicles by adjusting RPM level, gear choice and elapsed time to your desired values.
Once the calibration is successful you're ready to roll!

Measurement

The measurement involves two phases:

Phase 1. Acceleration

Phase 2. Automatic deceleration after idle. The second phase lasts about 10 seconds. The program automatically signals the end of the deceleration phase with an acoustic signal.

Press GO to start measuring. The message "you can move" is displayed. Vehicle power measurement is usually done in third or fourth gear in the available engine speed range.

To accurately calculate the torque and obtain the correct graph, it is advisable to move the vehicle in first and second gear at low speed, then after engaging the third or fourth gear, launch the measurement.

The application also allows you to enter a very precise acceleration time from 0 to 100 km/h, up to 200 km/h, and drive for a ¼ mile stretch during which engine performance can be measured and evaluated.

Regardless of the transmission type, the GO button and the accelerator pedal will be in the same position.

After reaching the required speed or measuring range, the vehicle can be stopped. When braking the power values ​​will be incorrect, but the acceleration results will be correct and will automatically appear on the screen when a certain speed is reached on a stretch of road.