Descripción
In order to use the service, you need to provide us the original files of the:
BCM CPU 1L15Y/1N35H/2M25J/5M48H (PFLASH+DFLASH)
ECU FLASH+EEPROM
BCM modules can be read with VVDI Prog or VVDI Multiprog (listed as Audi BCM).
Engine ECU divide in two categories:
MED17 series: FLEX, Trasdata, VVDI Multiprog, PCMFLASH, etc.
CAMPI series: KTAG, Trasdata are recommended. If EEPROM cannot be read, will need to desolder it as well and then read with VVDI Prog, Multiprog, or similar.
Please confirm the appearance of the module matches before trying to solder pins.
Remember to note the LOCK ID (e.g. FE for unlocked) of the modules when unlocking so you can lock the BCM back.
This service is needed if replacing an ECU module without the possibility to clone data.
If you have questions about this service or you are not sure whether the hardware of your donor module is compatible, contact us BEFORE asking the service, as the service is not refundable!
For the manuals, your tool will provide you directly those which match your device.
Lamborghini Urus is currently not supported, however you can align the ECU online with ODIS.
