Bentley Bentayga Porsche Cayenne (9Y) Panamera (971) 2018-2024 Inverter Motor Repair Kit

Descripción

Aftermarket Repair Kit: friction plate for the inverter motor mounted on hybrid Bentley Bentayga Porsche Cayenne (9Y) Panamera (971) 2018-2024.

The kit is used to solve fault codes such as:
P2D8D00 clutch disengagement actuator: clutch opening causing insufficient slipping 

This issue appears often around 100000 km of life of the inverter, and is solved by replacing the parts included in the kit. Check the video for more info:


After the repair, remember to do the basic setting to clear out error code P080A00 - Hybrid disengagement clutch - no basic setting. During this process, ensure:
1. HV battery is charged to over 20%, or charger is connected;
2. Clutch temperature is under 100 C°;
3. Coolant temperature is over 65 C°  and engine has been running for 5-10 minutes;
4. Ambient temperature is over 10 C°
Use your diagnostic to enter live data to confirm all sensors readings are OK if the basic setting procedure fails.

After basic setting, hybrid mode will work again.

Important: when replacing plates, make sure they are set properly, with a total thickness of the friction pads install equal or above 5 mm. Ask a professional with the proper equipment to do it, as the better this step is done, the less likely the plate will fail in future, and the longer overall the repair will last.

We strongly recommend to measure your own friction plates before purchase, so you can match the size with ours. We use 3.0, 3.5 and 4.0 mm friction plates, but other sizes may be present in certain cases. If the plate is not the correct size, your repair may not last! If you are not sure, we'd recommend going with the 3.5 mm option as it's more commonly used in our experience, especially on Cayenne.


Info
Type: Inverter motor repair kit
Manufacturer: 
Brand: Porsche, Bentley
Manufacturer Part Number: -
Vehicle Part Number: 
Other Part Numbers: 

Conditions
Hardware: 100% working, aftermarket
Comment: the installation is explained in the video. Make sure to follow it when proceeding, and if you are not sure, ask our technicians! Make sure you have PIWIS 3 for the basic setting! Non original diagnostics tools have not been tested yet.

Warranty: 3 months

Forma del producto

Next day shipping  

$300.00

Import fees may apply. Ask our team for more info!

  • ¿Enviado hoy? Pide dentro: Jul 22, 2026 14:00:00 +0800
    • Guaranteed secure & safe checkout.

      paypal
      Before you order...

    Check on the "Conditions" paragraph right above if any device is needed for coding or programming this product.

    On your purchase, you will receive detailed instructions on how to install your new part.

    Remember you can always contact us in advance for any info!

      100% Tested

    The product has been tested before shipping.

    ShippingShipping

    We ship by DHL, FEDEX and UPS worldwide: for these couriers, delivery times are usually as it follows:
    Europe -> 5-7 days
    ASEAN and East Asia -> 1-3 days
    GCC and Oceania -> 3-6 days
    Rest of Asia -> 4-7 days
    Rest of the world -> 7-10 days

    For USA market please check here.

    Descripción

    Aftermarket Repair Kit: friction plate for the inverter motor mounted on hybrid Bentley Bentayga Porsche Cayenne (9Y) Panamera (971) 2018-2024.

    The kit is used to solve fault codes such as:
    P2D8D00 clutch disengagement actuator: clutch opening causing insufficient slipping 

    This issue appears often around 100000 km of life of the inverter, and is solved by replacing the parts included in the kit. Check the video for more info:


    After the repair, remember to do the basic setting to clear out error code P080A00 - Hybrid disengagement clutch - no basic setting. During this process, ensure:
    1. HV battery is charged to over 20%, or charger is connected;
    2. Clutch temperature is under 100 C°;
    3. Coolant temperature is over 65 C°  and engine has been running for 5-10 minutes;
    4. Ambient temperature is over 10 C°
    Use your diagnostic to enter live data to confirm all sensors readings are OK if the basic setting procedure fails.

    After basic setting, hybrid mode will work again.

    Important: when replacing plates, make sure they are set properly, with a total thickness of the friction pads install equal or above 5 mm. Ask a professional with the proper equipment to do it, as the better this step is done, the less likely the plate will fail in future, and the longer overall the repair will last.

    We strongly recommend to measure your own friction plates before purchase, so you can match the size with ours. We use 3.0, 3.5 and 4.0 mm friction plates, but other sizes may be present in certain cases. If the plate is not the correct size, your repair may not last! If you are not sure, we'd recommend going with the 3.5 mm option as it's more commonly used in our experience, especially on Cayenne.


    Info
    Type: Inverter motor repair kit
    Manufacturer: 
    Brand: Porsche, Bentley
    Manufacturer Part Number: -
    Vehicle Part Number: 
    Other Part Numbers: 

    Conditions
    Hardware: 100% working, aftermarket
    Comment: the installation is explained in the video. Make sure to follow it when proceeding, and if you are not sure, ask our technicians! Make sure you have PIWIS 3 for the basic setting! Non original diagnostics tools have not been tested yet.

    Warranty: 3 months

    Footer image

    © 2026 My Supercar Expert, Tecnología de Shopify

    • US (USD $) US (USD $)
    • Español - bandera Español - bandera
    • American Express
    • Apple Pay
    • Bancontact
    • Google Pay
    • iDEAL Wero
    • Mastercard
    • PayPal
    • Union Pay
    • Visa

    Ingresa en

    ¿Ha olvidado su contraseña?

    ¿Aún no tienes una cuenta?
    Crear una cuenta